Rockwell Automation 2094 Kinetix 6000 Axis Module and Shunt Module Install User Manual
Page 6
Advertising
Publication 2094-IN004D-EN-P — September 2006
6
Kinetix 6000 Axis Module and Shunt Module
5. Pivot module downward and align the guide pins on the power
rail with the guide pin holes in the back of the module.
6. Gently push the module against the power rail connectors and
into the final mounting position.
Guide Pin
Holes
Power rail
(side view)
in upright
vertical position.
Integrated Axis Module
(side view)
Integrated Axis Module
(rear view)
Guide Pins
Pivot module downward
and align with guide pins.
TIP
The IAM can have two or three power rail connectors and guide
pins, the AM can have one or two, all other modules have one.
Power Rail
Integrated Axis Module
Bracket secured in slot.
Advertising