Rockwell Automation 2094 Kinetix 6000 Axis Module and Shunt Module Install - Manual (Page 7)

Publication 2094-IN004D-EN-P — September 2006
Kinetix 6000 Axis Module and Shunt Module 7
7. Use 2.26 Nm (20 lb-in) torque to tighten the mounting screws.
8. Repeat Steps 1...7 for each AM, SM, or PRF module
.
Replacing Kinetix 6000 Drive Components
For Kinetix 6000 drive component removal and replacement
procedures, refer to the Kinetix 6000 Multi-axis Servo Drive User
Manual, publication number 2094-UM001.
Bottom front view of
single-wide AM, SM, or PRF
(AM is shown).
Mounting Screws
Bottom front view of
double-wide IAM or AM
(AM is shown).
IMPORTANT
There are two mounting screws when mounting
2094-AC32-M05, -BC04-M03, and -BC07-M05 (double-wide)
IAMs and 2094-AM05, -BM03, and -BM05 (double-wide) AMs.