Rockwell Automation 2090-CBKS8-16AA03 Kinetix 6000M Manual Brake Release Cable Installation Instructions User Manual
Kinetix 6000m manual brake release cable, Installation instructions, About the manual brake release cable
Advertising
Installation Instructions
Kinetix 6000M Manual Brake Release Cable
Catalog Number 2090-CBKS8-16AA03
About the Manual Brake Release Cable
The Kinetix
® 6000M integrated drive-motor (IDM) unit is available with a spring-set holding
brake that automatically engages when 24V power is removed. During normal operation, the
brake is automatically controlled by the motion control system or manually controlled using
RSLogix 5000 commands. This cable lets you manually release or apply the brake on an IDM
unit during installation and maintenance, without having to connect and activate an IDM power
interface module (IPIM).
Topic Page
Advertising