Rockwell Automation LiquiFlo 1.0 and 1.5 External Bus Resistor Kit (400 Amp) User Manual
Page 6
Advertising
6
Instruction Manual D2-3535
Step 5: Unplugging
Connectors P1 and P2 and
Routing the Wiring Harness
Locate the P1 and P2 Connectors near the upper-left part of the power
structure and unplug them.
Important: The harness connections are considered power level wiring.
Run them separately from I/O and signal wiring.
P1 and P2
To Resistor Assembly
Push Here
to Release
Connector
Advertising