Step 2: replace the door filters – Rockwell Automation 20D PowerFlex 700S/700H Drives, Frames 10...14 NEMA/UL Type 12 Door and Roof Filters User Manual
Page 3
Rockwell Automation Publication PFLEX-IN018C-EN-P - February 2011
3
PowerFlex® 700S and 700H Drives, Frames 10…14, NEMA UL Type 12 / IP54 Replacement Door and Roof Filters
Step 2: Replace the Door
Filters
1. Open the enclosure door(s).
2. Remove the hexalobular head screws that secure the filter brackets and
metallic filters to the outside of the enclosure door. Retain all screws for
reuse. Note: You must secure the nuts on the inside of the enclosure door
to remove the two center screws at the top of each of the door filter
brackets.
3. Remove the filter brackets and existing filters from the door(s).
Outside of door
Remove all screws
Remove all screws
Inside of door
Secure nuts before
removing screws on
outside of door
Secure nuts before
removing screws on
outside of door