Rockwell Automation RDD-B2153 Rotary Direct Drive Bearingless Motors - Manual (Page 12)

12 RDD-Series Rotary Direct Drive Bearingless Motor Installation Instructions
Publication RDB-IN001A-EN-P — October 2009
Mount the Motor
Follow the diagram and steps below to install a motor on the machine.
IMPORTANT
The preferred motor-mounting orientation is with the feedback and power connectors on
the bottom of the motor. The preferred orientation improves environmental protection.
Alternate alignment ports are shown in the
Product Dimensions drawing.
Step Description
1 Center motor on shaft.
2 Position motor on machine shaft and mate pilot in the machine recess.
3 Using an alternating pattern, insert and tighten fasteners.
3
1
2