Rockwell Automation FactoryTalk Historian SE ActiveView 3.2 User Guide User Manual
Page 66
Advertising
●
●
●
●
●
FactoryTalk Historian ActiveView User Guide
58
7. In VBA terminology, you are setting the ServerIniURL and
DisplayURL properties of the Control. The DisplayURL is required.
8. Click OK.
9. In the spreadsheet, click the Design Mode button
to switch from
VBA Design Mode to Run Mode. This allows the ActiveView Control
to load acview.exe and show the Display Document file.
Once you establish a Display Document in a spreadsheet, you can alter
the document's size or position by clicking the Design Mode button on
the VBA Toolbar or Controls Toolbox and moving or resizing the
display.
Advertising