Rockwell Automation FactoryTalk Historian SE ActiveView 3.2 User Guide - Manual (Page 90)

●
●
●
●
●
FactoryTalk Historian ActiveView User Guide
82
 Windows XP, Windows 7, or newer operating systems.
 A minimum of 175 MB of disk space.
 Microsoft Internet Explorer 5.5 with Service Pack 2, or higher.
Install FactoryTalk Historian ActiveView
You can install FactoryTalk Historian ActiveView by running the
setup.exe file.
You can install FactoryTalk Historian ActiveView without removing
previous versions. However, note that if you have accessed the software
within the previous five minutes, the acview.exe process may still be
running. You must stop it using the Task Manager before you start
installation.
Developer Installation
You can install and run FactoryTalk Historian ActiveView and
FactoryTalk Historian ProcessBook on the same PC if they are the same
version number. When both applications are present, acview.exe, rather
than ProcBook.exe, becomes the automation server for the ActiveView
Control. The FactoryTalk Historian BatchView symbol is installed with the
FactoryTalk Historian ActiveView installation, but you must install the
FactoryTalk Historian ProcessBook add-in separately to create or modify
those symbols in FactoryTalk Historian ProcessBook.
The only difference between a developer installation and a user installation
is that the developer installation installs the directory
pipc\acview\webdev.
Use the default installation of FactoryTalk Historian ActiveView provided
by Rockwell Automation to develop FactoryTalk Historian ActiveView
Web sites.