Rockwell Automation SB3000 AC Power Modules - Manual (Page 61)

Technical Specifications A-3
Three-Phase AC Input Voltage
• Voltage Range: 200 to 500 Volts, +/- 10%
• Frequency Range: 25, 50, and 60 Hz (+/- 2 Hz)
• Frequency Rate of Change: 5 Hz per Second
• Maximum Phase Imbalance: 5%
Output Phase Signals (181-182, 182-183)
• Signal Waveform: 10 mA square wave
• Phase Accuracy: < 2%
• Phase Shift versus Frequency: Phase Shift = 0.637 x Input Frequency
• Output Open-Circuit Voltage: 15 Volts
• Short-Circuit Current: < 40 mA
Analog Output Voltage
• Gain: 675 VAC RMS = 10 VDC
• Filter Break Frequency: 23 Hz
• CMRR: 200:1
TSB3000 Power Module Replacement Fuse Specifications
1
Fuse Volts Class Type Rating
Rockwell Part
Number Torque Specifications
1FU 600 CC KLDR 5 A 64676-29R --
2FU 600 CC CCMR 25 A 64676-72BB --
3FU 600 CC KLDR 3.2 A 64676-29P --
F101 1000 Semiconductor 1000 A 64676-80P 41 Nm (30 lb-ft)
F102 1000 Semiconductor 1000 A 64676-80P 41 Nm (30 lb-ft)
F103 1000 Semiconductor 630 A 64676-79AZ 20.5 Nm (15 lb-ft)
F104 1000 Semiconductor 630 A 64676-79AZ 20.5 Nm (15 lb-ft)
F105 1000 Semiconductor 630 A 64676-79AZ 20.5 Nm (15 lb-ft)
+/- 15V PS* 250 -- F 1.6 A 64676-82U --
+/- 24V PS** 250 -- T 2.5 A 64676-71P --
+/- 24V PS*** 250 -- F 2.0 A 64676-82V --
25 KHz PS
11FU
12FU
600 CC -- 8 A 64676-30H --
25 KHz PS
21FU
26FU
250 -- F 2 A 64676-66C --
1. Fuse locations shown in figures 4.2, 4.3, and 4.4.