Rockwell Automation 20D PowerFlex 700H/700S AC Drives Frames 13 and 14 Main Fan Capacitor Rplcmnt. Kit User Manual
Page 13
Rockwell Automation Publication PFLEX-IN027A-EN-P - July 2011
13
PowerFlex 700H and 700S AC Drives Frames 13 and 14 Main Fan Capacitor Replacement Kit
4. Disconnect the fan inverter connector from the connector on the support
bracket and pull the connector out of the sheet metal support bracket
using a pliers.
5. Remove the M8 x 20 mm hexagonal socket screw from the chassis in front
of the fan housing in order to allow room for the fan housing to be
removed from the unit. Tightening torque for re-assembly is 20 N
•
m (177
lb
•
in).
6. Remove the four POZIDRIV screws that secure the main fan housing to
the inverter assembly and remove the fan housing. Tightening torque for
re-assembly is 3.5 N
•
m (31 lb
•
in).
Disconnect fan
cable
Remove screws
and fan housing
Using a pliers,
remove connector
from bracket
Remove screw from
chassis in front of
fan housing.