Rockwell Automation 20D PowerFlex 700H/700S AC Drives Frames 13 and 14 Main Fan Capacitor Rplcmnt. Kit - Manual (Page 6)

6 Rockwell Automation Publication PFLEX-IN027A-EN-P - July 2011
PowerFlex 700H and 700S AC Drives Frames 13 and 14 Main Fan Capacitor Replacement Kit
Step: 3 Remove the
Existing Fan Capacitor The procedures vary depending on whether you are replacing a main fan
capacitor on a converter or inverter unit.
• If you are replacing a capacitor for a fan on the converter unit, continue
with Replacing the Fan Capacitor on the Converter Unit below.
• If you are replacing a capacitor for a fan on the inverter unit, continue with
Replacing the Fan Capacitor on the Inverter Unit on page 11 .
Replacing the Fan Capacitor on the Converter Unit
1. Remove the two fuses from the fuse holder.
2. Disconnect the +DC and -DC wires from the fan fuse holder.
3. Remove the M4 x 8 mm POZIDRIV screw that secures the fuse holder
assembly to the drive chassis and remove the fuse holder assembly.
Tightening torque for re-assembly is 3 N
• m (26.5 lb • in).
Remove fuses, +DC and -DC
wires, screw and fuse holder