I/o connectors, Chassis dimensions – Rockwell Automation T8100 Trusted Controller Chassis User Manual
Page 13
Advertising
Trusted
TM
TMR Controller Chassis T8100
Issue 12 Jul 12
PD-T8100
13
8. I/O Connectors
Up to eight DIN 41612 I/O connectors, slotted into the chassis back-plate, can be provided for
connection to TrustedTM IO and / or Interface Modules to their sub-systems. Double and single
connector options are available where applicable.
Figure 7 Connector to Chassis Attachment Features
Each I/O connector has an earth tail which should be fixed to the cable saddle bracket across the rear
of the chassis using M5 x 10 Pan Head Taptite screws. The strap holes must be tapped in fitting the
Taptite screws to ensure a good earth bond.
9. Chassis Dimensions
The dimensions of the Trusted
TM
Controller Chassis are shown in Figure 7.
Figure 8 Chassis Dimensions
Advertising