Bus terminations, Bus connections – Rockwell Automation T8100 Trusted Controller Chassis User Manual
Page 9
Advertising
Trusted
TM
TMR Controller Chassis T8100
Issue 12 Jul 12
PD-T8100
9
3. Bus Terminations
The backplane contains termination circuits for certain bus signals. The terminators are used to reduce
signal reflections on critical signals and also to provide default logic levels for open or tri-stated signals.
Termination circuits are located at the end slot positions, 1 and 10.
4. Bus Connections
All bus connections are triplicated except for the +24V dc external power supply, which is dual
redundant.
Advertising