Inter-module bus backplane – Rockwell Automation T8100 Trusted Controller Chassis User Manual
Page 8
![background image](/manuals/581321/8/background.png)
Trusted
TM
TMR Controller Chassis T8100
Issue 12 Jul 12
PD-T8100
8
2. Inter-Module Bus Backplane
The Chassis houses the Inter-Module Bus backplane which is a single, printed circuit board assembly.
The Inter-Module Bus backplane provides the electrical interconnections between modules in a
Trusted
TM
Controller Chassis. These interconnections are part of the physical layer communications
between modules.
Figure 2 shows a simplified top-level block diagram of the Inter-Module Bus backplane.
Figure 2 Inter-Module Bus Backplane
Please note that the above diagram illustrates only Trusted
TM
Interface modules. The chassis can
also accommodate a combination of Trusted
TM
IO and / or Interface Modules.
Figure 3 Backplane Front View
Note: The three switches shown on the backplane are unused and should be left with the tape
covering them.