Rockwell Automation FactoryTalk View Machine Edition Installation Guide - Manual (Page 9)

P REFACE • W HAT ’ S IN THIS I NSTALLATION G UIDE ?
ix
•
•
•
• •
Other Documents
Open the FactoryTalk View online manuals
The FactoryTalk View Machine Edition User’s Guide, Installation Guide, and the Release
Notes are available online, while you are working in FactoryTalk View Studio for
Machine Edition.
To open the online manuals
1. Open FactoryTalk View Studio for Machine Edition.
2. On the Help menu, select Online Books, and then select the manual you want to
open.
Contact Rockwell Automation Technical Support
If you can not find the answer to your question in the documentation or on the Internet,
contact Rockwell Automation Technical Support, using any of these methods:
 Telephone: 1-440-646-3434
 Online: http://support.rockwellautomation.com
Document Description
PanelView Plus Terminals User
Manual Publication 2711P-UM007 Describes the tasks to install, configure,
and use FactoryTalk View ME on
PanelView Plus 7 terminals.
PanelView Plus Terminals User
Manual Publication 2711P-UM006 Describes the tasks to install, configure,
and use FactoryTalk View ME on
PanelView Plus 6 terminals.
PanelView Plus Terminals User
Manual Publication 2711P-UM001 Describes the tasks to install, configure,
and use FactoryTalk View ME on
PanelView Plus, and PanelView CE
terminals.
Activation Instructions
Publication FTA-QS002 Get and install activations for all the
computers in your system.
During installation, Adobe Reader can be installed on the computer so you can view online
manuals. For information about using Adobe Reader, see the product documentation.