Rockwell Automation T3488/T3488A ICS regent Monitored Guarded Output Modules - Manual (Page 19)

Monitored Guarded Output Modules (T3481/81A, 84 and 88/88A)
P D - 6 0 3 3 M a r - 0 6 (Issue 2)
19
Figure 10. Defining the Guarded Output Module Definition.
If you do not configure the modules for Dual Mode then the
output testing performed on the modules will not be
coordinated and each of the modules wired in parallel will
report a fault.
For the T3484, 110 VAC Monitored Guarded Output Module
you must also select the line frequency of the field power
supply. In the Line Frequency drop-down list, select either
50 Hz or 60 Hz.
4) Edit each point:
Choose Edit from the Module Definition dialog box to define a
name and description for each output point. In the Monitored
Guarded Output Point dialog, enter names and values for the
configuration fields as described below.
Note:
Note: