Rockwell Automation T3488/T3488A ICS regent Monitored Guarded Output Modules - Manual (Page 20)

Monitored Guarded Output Modules (T3481/81A, 84, and 88/88A)
2 0 (Issue 2)
Industrial Control Services
Figure 11. Defining a Guarded Digital Output Point.
Name
Also called the tag name, this is the name used in the
application program to reference the output point. The name
can be up to 12 characters long.
Description
This 40-character field provides a place to describe the output
point definition. The description is used to help document
your system (it does not affect application program operation).
Comm Protect
Marking the Comm Protect check box protects the point from
changes by communications functions such as data write,
forcing, and load initial value when Comm Protect is enabled.
Initial Value
The initial value for the output is loaded to the Regent when
you load the I/O configuration and also when you load the
application program that controls the output.
Final Value
The final value for the output is loaded to the Regent when
the application program that controls the output is deleted.
Unless special circumstances exist, you should always enter