Rockwell Automation T3488/T3488A ICS regent Monitored Guarded Output Modules - Manual (Page 23)

Monitored Guarded Output Modules (T3481/81A, 84 and 88/88A)
P D - 6 0 3 3 M a r - 0 6 (Issue 2)
23
Safety Considerations
The Monitored Guarded output modules are TÜV certified to
Risk Class 5 for safety critical outputs. The modules are
approved for de-energize to trip safety critical outputs in
single or dual module configurations.
The modules are also approved for energize to trip safety
critical outputs in dual module configuration, but only if the
fault name variables are configured and used to automatically
alarm and annunciate the detection of load/fuse faults to plant
operations personnel.
Specifications
Safetybus Power 1.5 load units
Number of Outputs 16 circuits divided into two
groups of 8 circuits each
T3481 (81A) T3484 T3488 (88A)
Voltage Range 18 to 36 VDC 90 to 130 VAC 95 to 140 VDC
Frequency N/A 47 to 63 Hz N/A
Load Current
(0 to 40 ° C)
derating (at 60 °
C)
2 amp
1.5 amp
0.7 amp
0.5 amp
1.0 amp
0.75 amp
Minimum Load 20 mA ( 5mA) 20 mA 35 mA (5mA)
On State Drop 1.0 V, maximum 2.5 V, maximum 2.0 V, maximum
Surge Current
incandescent,
capacitive loads:
inductive loads:
3.5 amps, peak
7 amps for
20 msec
3.5 amps, peak
3 amps for
20 msec
3.5 amps, peak
3 amps for 20 msec
Output Leakage
single, fail-safe
module:
dual, fault-tolerant
modules:
5 mA, ( 700ua)
maximum
7.5 mA, (1 mA)
maximum
5.5 mA,
maximum
8.5 mA,
maximum
5.5 mA, (700ua)
maximum
8.5 mA, (1 mA)
maximum
T3481/81A T3484 T3488/88A