Rockwell Automation Emonitor with a Gupta Multi-User Database - Manual (Page 27)

4 • U PGRADING FROM A PREVIOUS VERSION
23
•
•
•
• •
same computer. Follow the instructions on the screen to install or upgrade RSLinx
Classic.
6. When finished, return to the main Autorun screen. If you are using the XML Gateway
with your Emonitor system, click XML Gateway Prerequisites. Follow the
instructions on the screen.
7. When finished, click Back to return to the main Autorun screen, and then click
Emonitor. Follow the instructions on the screen.
8. The installation program detects that installed Emonitor components are not up to
date.
„
Upgrade all components installed by the previous setup. This option installs
the upgraded version with the same configuration as your existing installation.
„
Remove all installed components. This option removes the Emonitor software
from your computer. You will not be able to run Emonitor after you remove the
software; however, the Emonitor database, other data files, and configuration files
remain on your computer.
Click Upgrade all components installed by the previous setup. If you see a
message about a read-only file having been detected, click Yes to continue.
The XM/DYN Online Data and Logix Online Data software require the RSLinx Classic
software. It is recommended that you upgrade RSLinx before you upgrade Emonitor.