Rockwell Automation T8013 Trusted SOE and Process Historian Package - Manual (Page 19)

Trusted
TM
SOE and Process Historian Package T8013
Issue 16 April 2010 PD-T8013 19
3.10.3. Analogue SOE Variables
The Trusted TM SOE collector also allows the user to enter analogue variables to the SOE log. This will
allow the user to attach a channel state to an SOE tag. To do this the user must create the variable
within the IEC1131 TOOLSET Data Dictionary. Creating or selecting this variable will initiate the
dialogue box shown in Figure 12 below.
Figure 12 Analogue Variable Setup
With the above dialogue box open, the user must name the variable by entering the appropriate data in
the Name and Comment boxes. For the purpose of this example, the variable is a process
temperature actuator forming an input to the System. Input and Integer must be enabled, then the
user must select the Extended button. This will initiate the window shown in Figure 13 below.
Figure 13 Analogue Extended Attributes
The user should enable the Boolean I/O Enable SOE logging option to provide the variable with SOE
attributes. The user must select the OK button, then select OK to exit the next window.