Chapter 4 configuring the converter, Chapter 4, Configuration tools -1 – Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. User Manual
Page 19: Hapter, Configuring the converter, 1 configuration tools
Configuring the Converter
4-1
C
HAPTER
4
Configuring the Converter
Chapter 4 provides instructions and information for configuring the 1203-USB
converter.
4.1
Configuration Tools
The 1203-USB converter stores parameters and other information in its own
Non-Volatile Storage (NVS) memory. You must, therefore, access the converter to
view and edit its parameters. The following tools can be used to access the converter
parameters:
Important: The RS-485 serial port on MDI drives does not need to be configured
before using the converter. MDI communications are configured
automatically (19.2K baud and 8-N-1).
Topic
Page
Configuration Tools
Using the DPI Class OIM
Using the MDI Class OIM
Using V*S Utilities
V*S Utilities Quick Start
Using Terminal Emulation Software
Resetting the Converter
Table 4.1 – Configuration Tools
Tool
Refer to...
DPI Class OIM (20-OIM-*)
MDI Class OIM (33-OIM-*)
V*S Utilities Software (version 4.06 or higher)
Terminal emulation software