Rockwell Automation 1203-USB USB Converter (Same as DRIVES-UM001) Out of synch with AB version. - Manual (Page 20)

4-2 USB Converter User Manual
4.2 Using the DPI Class OIM
If you are connected to a DPI drive and it has an LED or LCD OIM (Operator Interface
Module), you can use the OIM to access and edit parameters in the 1203-USB
converter (see basic steps shown below). It is recommended that you read through
the steps for your OIM before performing the sequence. For additional OIM
information, refer to your DPI Drive User Manual.
Table 4.2 – LED OIM Quick Start
Step Key(s) Example Screens
1. Press ALT and then Sel
(Device) to display the
Device Screen.
2. Press the Up Arrow or
Down Arrow to scroll to
the 1203-USB converter.
Letters represent files in
the drive, and numbers
represent ports. The
converter is usually
connected to port 2 (the
external port) and
sometimes to port 3
(available with a splitter).
3. Press the Enter key to
enter your selection. A
parameter database is
constructed, and then the
first parameter is
displayed.
4. Edit the parameters using
the same techniques that
you use to edit drive
parameters.
OR
ALT Sel
Device
Parameter
Number
Port Number