Rockwell Automation Flex/WebPak 3000 DC Drive ControlNet, Network Communication Board, 915FK2101 - Manual (Page 21)

Drive Configuration 3-5
3.10 NETWORK KIT (P.796)
NETWORK KIT (P.796) indicates whether the network option board is operating correctly
in the drive.
Range: PRESENT (1), NOT PRESENT (2), FAILED DIAGS (3)
Type: Read-only (output)
3.11 NETW IN REG 1 (P.905)
NETW IN REG 1 (P.905) indicates the value being written by the network master into file
address N11:10 in the network option board’s dual-port memory.
Range: -4095 to 4095
Type: Read-only (output)
3.12 NETW IN REG 2 (P.906)
NETW IN REG 2 (P.906) indicates the value being written by the network master into file
address N11:11 in the network option board’s dual-port memory.
Range: -4095 to 4095
Type: Read-only (output)
3.13 NETW IN REG 3 (P.907)
NETW IN REG 3 (P.907) indicates the value being written by the network master into file
address N11:12 in the network option board’s dual-port memory.
Range: -4095 to 4095
Type: Read-only (output)