Autocue QPro User Guide - Manual (Page 17)

QPro User Guide HM.docx 2011-07-14
17 © 2003-2011 Autocue Group Ltd.
Don’t lose your work
QPro automatically saves your script at defined intervals. If you are working with a new script
you will be prompted to save your work after approximately five minutes.
The following are the alternative ways of saving your work: select File >> Save from the main
menu bar or click the Save button on the toolbar
press the key sequence: [Alt] >> [F] >> [S]
All QPro files have a *.wsr file name extension and are saved by default to the
C:\QNxt\Documents folder.
Format your scripts
A script can be formatted to meet the requirements of the person who will be reading the
script. For example you can set the typeface, colour and size of the words that appear on
the prompter monitor. The following table indicates the available formatting options and
the corresponding control keys.
Format alteration Key sequence
Underline [Ctrl] + [U]
Italic [Ctrl] + [I]
Bold [Ctrl] + [B]
Select alternative font [Ctrl] + [F]
Inverse [Ctrl] + [E]
Change text to the default colour [Ctrl] + [0]
Change text to red [Ctrl] + [1]
Change text to green [Ctrl] + [2]
Change text to blue [Ctrl] + [3]
Change text to yellow [Ctrl] + [4]
Justify text to the right [Ctrl] + [Shfit] + [R]
Justify text to the left [Ctrl] + [Shfit] + [L]
Justify text to the centre [Ctrl] + [Shfit] + [C]
Format all text [Ctrl] + [Shfit] + [A]
Select all text [Ctrl] + [A]