Autocue QPro User Guide - Manual (Page 7)

QPro User Guide HM.docx 2011-07-14
7 © 2003-2011 Autocue Group Ltd.
Your license file is stored in a folder named License on the installation CD. Press OK to proceed.
The License Agreement dialogue will be displayed, read through the agreement and click on
Accept the agreement checkbox and then Install to proceed
The Choose Install Path dialogue box is displayed. Click OK to use the Default location, or enter
a different one.
Note: It is strongly recommended that you use the default location of C:\QNxt.
Various messages are displayed indicating that the installation is in progress and the QPro files
are being copied, extracted and downloaded from the CD. When the installation is complete,
a message is displayed indicating a successful setup. Click OK.
Insert the USB license dongle supplied with your CD. You should see a QPro icon on the
desktop, before you run the software please read the section below to get the best out of QPro.
Preparing your computer and monitor
To obtain the best performance with your QPro software, ensure that the computer on which you
are running the software has the following parameters set.
Right-click on the QPro icon on the computer desktop and select Properties.
Click on the Compatibility tab and make sure that the Run in 256 Colours and. Run in 640 x 480
screen resolution checkboxes are selected.