Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 19)

19
You can connect a Camcorder and
watch your recordings or home
movies on the BeoVision 5. If you
have connected e.g. a BeoCord
V 8000 video tape recorder to your
BeoVision 5, you can copy
Camcorder recordings onto a
videotape.
Watch and copy Camcorder recordings
Watch Camcorder on BeoVision 5
To watch your Camcorder recordings, connect
the Camcorder and switch the BeoVision 5 on.
When you start playback on your camera, the
BeoVision 5 automatically registers the signal
and you can see the pictures from the
Camcorder on the screen.
To watch Camcorder recordings…
Connect your Camcorder and
start playback on the Camcorder
Press to switch on BeoVision 5 –
the Camcorder signal appears
automatically
If the signal from the Camcorder gets
switched off accidentally…
Press until CAMCORD* is shown
in the Beo4 display and press GO
*In order to display CAMCORD in the Beo4
display, you must first add it to the Beo4 list of
functions. Refer to the Beo4’s own Guide for
further information.
TV
LIST
CAMCORD
GO
Copy from a Camcorder
When you connect your Camcorder to the
direct access socket panel, you can copy
Camcorder recordings onto a videotape. While
the tape is being copied, you can watch a TV
programme or switch BeoVision 5 to standby.
To copy a recording from a Camcorder…
Connect your Camcorder and
start playback on the Camcorder
Press to prepare BeoCord V 8000
for recording
Press again to start recording
Press V TAPE and then STOP to
pause a recording
Press to resume a paused
recording, or…
…press STOP again to stop a
recording entirely
RECORD
RECORD
V TAPE
STOP
GO
STOP