Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 5)

5
Displayed information and menus
Information about selected sources is
displayed at the top of the screen. In addition,
on-screen menus allow you to set or adjust
additional functions.
To call up the menu system…
Press MENU while the television
is switched on
How to use option menus…
Press to move through the
option menu, or…
…press the number keys on
Beo4 to select a numbered
option on a list
Press to enter your choice
How to use fill-in menus…
Press ▲ or ▼ to view your
choices for a single setting in a
fill-in menu, or ss and tt to move
from setting to setting
Press the number keys on Beo4
to enter settings
Press to enter your choice
In both option and fill-in menus, you can press
STOP to go back to a previous menu, or EXIT to
leave all menus.
1 Timer play
2 TV list
3 Setup
Menu
VOL 30
TV 12
Source Pr Start Stop Date
TV 1 13:30 - 14:30 27 Oct OK
Press MENU for Timer index
On-screen menus will give you either a vertical list
of options to choose from or a horizontal list of
settings to fill in.
You can choose if you want the navigation
cues in the menus to be shown. Factory
setting of the function is On, but you can
choose to deactivate it. Call up ‘Menu’ from
the ‘Setup’ menu and choose ‘On’ to activate
navigation cues or ‘Off’ to deactivate them.
The selected source and channel are shown
briefly when you select e.g. TV or change
channels. Volume level is shown while you
adjust it, and disappears after a few seconds.
Source Pr Start Stop Date
TV 1 13:30 - 14:30 27 Oct OK
Press MENU for Timer index
Menu
1 Timer play
2 TV list
3 Setup
Source Pr Start Stop Date
TV 1 13:30 - 14:30 27 Oct OK
Press MENU for Timer index
Option menu
Fill-in menu
MENU
▲ ▼
1 – 9
GO
▲ ▼
ss tt
0 – 9
GO