Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 39)

39
Preset positions for BeoVision 5 to
turn to
Choose one stand position for when you
switch BeoVision 5 on and one for when you
switch it off. You can also choose a secondary
viewing position, if you have more than one
favourite viewing angle.
Set positions for viewing and standby
If your BeoVision 5 is equipped with
the motorised stand, you can turn it
to the left or right using your Beo4
remote control.
You can program BeoVision 5 to turn
automatically on its stand to face
your favourite viewing position when
you switch it on, and turn away to a
standby angle when you switch it off.
You can also turn BeoVision 5 to the
desired positions manually.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Stand position
1
Turn TV to preferred position
> Press MENU to call up the main menu.
> Press 3 to call up the Setup menu.
> Press 4 to call up the Stand menu.
> Press ▼ until the appropriate stand position is
displayed.
> Press ss or tt to rotate BeoVision 5 to the
desired position.
> Press GO to store the position.
> Repeat the procedure for other stand positions.
> Press EXIT to leave all on-screen menus.
Choose stand position 1 for primary viewing
position, 2 for secondary viewing position, or 0 for
standby position.