Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 37)

37
Sound settings
You can adjust sound volume with the Beo4
remote control at any time without calling up
a menu, but you must call up the Sound menu
to be able to adjust bass, treble or loudness.
You can also adjust a BeoLab 2 subwoofer, if it
is part of your setup.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
5 Sound system
Counter Tape Speed PDC&VPS Marker
Time used 240 SP On On
Volume Bass Treble Loudness
32 0 0 On
> Press MENU to call up the main menu.
> Press 3 to call up the Setup menu.
> Press 2 to call up the Sound menu.
> Press GO to call up the Adjustment menu.
> Press ss or tt to move between menu items.
> Press ▲ or ▼ to adjust the settings for each
item.
> Press EXIT to store your settings until you switch
off BeoVision 5, or press GO to store your
settings permanently.
The Sound menu lets you calibrate your surround
sound speaker setup permanently. Refer to the
BeoVision 5 CD-rom and the chapter ‘Loudspeaker
setup – surround sound’ for further information.