Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 32)

Adjust tuned TV channels
If you wish to program a channel for a
particular sound type, then call up the Manual
tuning menu.
If the item ‘System’ appears on the menu, then
make sure that the correct broadcast system is
displayed before you begin tuning:
B/G… for PAL/SECAM B/G
I… for PAL I
L… for SECAM L
M… for NTSC
D/K… for PAL/SECAM D/K
All options may not be available, as this depends
on the television type.
32
Edit tuned TV channels
You can make adjustments to your
tuned TV channels at any time.
You can tune in channels not stored
during auto tuning by entering the
channel frequency and channel
number.
You can also enter settings before
you tune in channels. These may
include choosing a broadcast system
for certain types of channels, or
setting up a connected decoder to be
switched on automatically whenever
a coded channel is switched on.
In addition, you can edit your list of
channels by renaming channels,
moving them around in the list, or
deleting them.
Finally, you can make adjustments to
the individual channels by choosing a
suitable sound type.
TV tuning
1 Edit TV list
2 Add program
3 Auto tuning
4 Manual tuning
Freq Pr Name
210 1 . . . . . . . . More
Fine Decoder Sound
0 Off Stereo-2
> Press MENU to call up the main menu.
> Press 3 to call up the Setup menu.
> Press GO to call up the Tuning menu.
> Press GO again to call up the TV tuning menu.
> Press 4 to call up the Manual tuning menu.
> Press ss or tt to move between items on the
menu and ▲ or ▼ to view your choices for each
item. Pressing ▲ when the cursor is placed on
Freq (frequency) will start automatic search for a
channel. Numeric values can be entered using
the number keys on Beo4. When entering
names, press ▲ or ▼ to reveal the character you
want. Then press tt to move to the next
character position.
> To view more options, press tt to move the
cursor to More and press GO. If you set the item
Decoder to On, Dec1 or Dec2, you can return to
the previous menu to start tuning in coded
channels by pressing GO.
> When a channel is tuned in, you can also select
the sound system you want; press ▲ or ▼ to
switch between the sound modes currently
transmitted or fine tune the channel.
> Press GO when you have entered your settings,
or press EXIT to leave all menus without storing.