Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 36)

36
Picture settings
Adjustment of the picture settings is done via
the BeoVision 5 Picture menu. You can adjust
picture brilliance, colour or contrast.
Adjust picture and sound settings
Picture and sound settings are preset
at the factory to neutral values which
suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
You can store your picture and sound
settings temporarily – until
BeoVision 5 is switched off – or you
can store them permanently.
Temporary settings are reset to
neutral values when you switch off
BeoVision 5.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Brilliance Colour Contrast
32 32 20
> Press MENU to call up the main menu.
> Press 3 to call up the Setup menu.
> Press 3 to call up the Picture menu.
> Press ss or tt to move between the items on the
menu.
> Press ▲ or ▼ to adjust the settings for each
item.
> Press EXIT to store your settings until you switch
off BeoVision 5.
> Press GO to store your settings permanently.
To change the picture format refer to the chapter
‘Home theatre viewing with BeoVision 5’ on page 8.