Bayer HealthCare Ascensia Contour Blood Glucose Monitoring System - Manual (Page 10)

Test Blood Glucose
7. Bring tip of the Test Strip to
lightly touch the drop of
blood. Hold until the Meter
beeps. Blood is automatically
pulled into the Test Strip
through the tip. The Meter
will now begin counting
down the 15 seconds
until the test is
complete.
8. Leave the Test Strip in the Meter
until the test result appears on
the display.
Caution: If you see “HI” or “LO” displayed, your blood
glucose level may be above 600 mg/dL (33.3 mmol/L) or
below 10 mg/dL (0.6 mmol/L). Repeat test. If you receive the
same result, call your physician or health care professional
immediately.
Turn Meter Off/Dispose of Used Test Strip
9. To turn your Meter off, simply remove the used Test Strip.
Your test result will automatically be stored in memory.
6