Bowers Group Advanced Electronic/Air Column PC-2200 - Manual (Page 7)

PC-2200
BOWERS METROLOGY page 7 /32 version 2.06 -E
1.4 KEYPAD CONFIGURATION
Escape
Measuring mode
Initialization of dynamic mode
Programming mode
Escape to previous menu.
Calibration
Measuring mode
Calibration functions
Programming mode
No functions
Preset
Measuring mode
Used to set the current
measured values to 0 or
pre-selected values
(See page 20)
Programming mode
No function
Enter
Measuring mode
Instrument OFF
Enter + ON = Reset
Programming mode
Used to select the current
menu or to set values of
variables
Program
Measuring mode
Access to the
programming mode
Programming mode
No function
Move upward
Measuring mode
Select M1, M2, M3, M4
Programming mode
Used to move from a specific menu
to other menu, or to increase the
values when setting the values of
variables.
Move left
Measuring mode
Send data
Programming mode
Used to move from a specific menu
to other or move the selected LED
to the next left LED
Move right
Measuring mode
No function
Programming mode
Used to move from a specific menu
to other or move the selected LED
to the next right LED
Move downward
Measuring mode
No function
Programming mode
Used to move from a specific menu
to other menu, or to decrease the
values when setting the values of
variables.