Brandmotion 1008-9527-V2 - Manual (Page 36)

INSTALLATION INSTRUCTIONS
9527 Instructions 6-18-12 F series-1 (1).doc 36 of 38
Section 11D: Reference –
Relocating the Compass Circuit Board for
vehicles with External Compass Module
(if required)
69. Remove the separate compass module
from the existing interior mirror by sliding it
downwards (Figure 47).
Figure 47
70. Remove connector from the compass
module (Figure 48).
Figure 48
71. Pry the compass apart with a
screwdriver (Figure 49).
Figure 49
72. Remove the circuit board from the
compass module (Figure 50).
Figure 50