Brandmotion 1008-9527-V2 - Manual (Page 37)

INSTALLATION INSTRUCTIONS
9527 Instructions 6-18-12 F series-1 (1).doc 37 of 38
Section 11D: Reference –
Relocating the Compass Circuit Board for
vehicles with External Compass Module continued
(if required)
73. Wrap the circuit board in the supplied
foam and cut an opening for connector
terminal (Figure 51).
Figure 51
74. Plug the compass module connector into
the circuit board (Figure 52)
Figure 52
.
75. Install the compass module circuit board
between underneath the headliner as shown.
The connector should face up, to the rear,
and to the right (Figure 53).
Figure 53