Sensor docking station status check, Solid green light, Blinking green light – Bully Dog 4038x Sensor Docking Station User Manual
Page 22: No light
21
Sensor Docking Station
Status Check
The Sensor Docking Station (SDS) has a green light that
will light up in different ways depending on how the SDS is
working and communicating with your GT or WatchDog.
Solid Green Light
The Sensor Docking Station is working and communicating
properly with the GT or WatchDog.
Blinking Green Light
The Sensor Docking Station is powered up and trying to
communicate with the GT or WatchDog.
•
Check the connection to the GT or Watchdog.
•
Make sure that the GT or WatchDog is working properly.
•
Ensure that the GT or WatchDog is updated (see page 1).
No Light
The Sensor Docking Station is not getting power.
•
Make sure that the key is in the “on” (or “run”) position.
•
Check the power connection.
*
Make sure the power harness is properly installed.
*
Make sure that the power harness is securely
connected (all of the ends).
*
Make sure that the fuse is in good shape (not blown)
and is properly seated.
PWR