Calculated Industries 4090 User Manual
Page 111
110 — ITI S
HEET
M
ETAL
/HVAC P
RO
How to Set Preferences
The following sections detail Preference Setting options.
Enter the Preference Mode by pressing
Ç = (Prefs). Access
each category by pressing the
= key until you reach the desired
setting. Within each category, press the
+ or – keys to toggle
between individual selections. Press
o to exit and set in your
Preference.
Note:
+ will advance, – will back up. Pressing the = key continuously in this mode
will revolve the Preference Settings full circle.
You may change these settings at any time by repeating the above,
and setting in a new preference. Or, you may review settings by
pressing
® =.
For example, if you wish to display all your dimensional area
answers in Square Meters, press
Ç = = (Area Std), then the +
key until “AREA 0.
SQ M
” is displayed. Simply exit this mode by
pressing
o or any key, and all your future area answers will be
displayed in Square Meters.