Calculated Industries 4090 - Manual (Page 112)

U
SER
’
S
G
UIDE
— 111
Accessing Preference Settings
To Set “Fractional Resolution”:
KEYSTROKE DISPLAY
Ç = (Prefs) (first press of =) FRAC 0-1/16
INCH
+ (plus sign) FRAC 0-1/32
INCH
+ FRAC 0-1/64
INCH
+ FRAC 0-1/2
INCH
+ FRAC 0-1/4
INCH
+ FRAC 0-1/8
INCH
To Set “Area” Answer Format:
KEYSTROKE DISPLAY
= (second press of =) AREA Std.
+ (plus sign) AREA 0.
SQ FEET
+ AREA 0.
SQ M
To Set “Volume” Answer Format:
KEYSTROKE DISPLAY
= (third press of =) VOL Std.
+ (plus sign) VOL 0.
CU FEET
+ VOL 0.
CU M
To Increase or Decrease Tread Width from Default of 10”:
KEYSTROKE DISPLAY
= (fourth press of =) T-WD 10
INCH
+* (plus sign increases height by 1/4 Inch) T-WD 10-1/4
INCH
–* (minus sign decreases height by 1/4 Inch) T-WD 10
INCH
*Keep pressing plus or minus to increase or decrease 1/4 Inch at a time.
To Increase or Decrease Stairwell “Headroom” from Default of 6’8”:
KEYSTROKE DISPLAY
= (fifth press of =) HDRM 6
FEET
8
INCH
+* (plus sign increases height by 1 Inch) HDRM 6
FEET
9
INCH
–* (minus sign decreases height by 1 Inch) HDRM 6
FEET
8
INCH
*Keep pressing plus or minus to increase or decrease an Inch at a time.
(Cont’d)