Calculated Industries QFCCL - Manual (Page 13)

P
OCKET
R
EFERENCE
G
UIDE
— 9
q
Consecutive presses of this key
calculate:
Press Result
1 Top Quilt Yardage
2 Backing Yardage*
3 Border Yardage**
4 Number of Strips to cut
for Border**
5 Border Strip Cut Width**
6 Drop Yardage**
7 Number of Strips to cut
for Drop**
8 Drop Strip Cut Width**
9 Binding Yardage***
10 Quantity of Strips to cut
for the Binding***
11 Stored Binding Strip Cut
Width***
Note: Continued presses of q will repeat
above sequence.
*Backing Yardage does not include repeats
.
**If Border or Drop is not entered, these values are
not displayed in the above Total Quilt Yardage list.
***All calculated items include adjustments for
seam allowance, except for Binding (it is
assumed the seam allowance is included in the
stored Binding cut value used for calculating
Binding Yardage and number of strips).
Note: Entries of top width, top length, border,
and drop are semi-permanent entries; that
means, they do not clear until you turn off your
calculator or until you enter a new value. You
can enter zero to clear these values if you have
previously stored values.