Calculated Industries QFCCL - Manual (Page 47)

P
OCKET
R
EFERENCE
G
UIDE
— 43
Error Codes
DISPLAY ERROR TYPE
OFLO Overflow (too large)
DIV Error Divide by 0
DIM Error Dimension error
ENT Error Invalid entry error
TYP Type error
FABRC Error Fabric error*
* Block or square height (with seam) exceeds
fabric width
Auto-Range – If an “overflow” is created
because of an input and calculation with
small units that are out of the standard
seven digit range of the display, the
answer will be automatically expressed in
the next larger units (instead of showing
“ERROR”) – e.g., 10,000,000 mm is shown
as 10,000.00 m. Also applies to Inches and
Yards.
Auto Shut-Off
Your calculator is designed to shut itself off
after about 8-12 minutes of non-use.