Calculated Industries QFCCL - Manual (Page 30)

P
OCKET
R
EFERENCE
G
UIDE
— 26
5. Calculate cut width of Strips:
s
TOTAL
4-1/2
INCH CUT WIDTH STRIPS
Note: The Square calculations are based on the
stored fabric width (in this example it is based on
the default of 40 Inches). If you have a different
fabric width (e.g., 18 Inch width x 22 Inch height),
you can enter your “scrap” width (e.g., 18 Inches)
as fabric width. Keep in mind your fabric width is
used for all your quilt, Block and Square calcula-
tions, so you will want to change it back to the
standard fabric width for accurate calculations.
Number of Squares Calculated
From Fabric (Length)
Find the number of 4-1/2 Inch (finished)
Squares that can be cut from three
Yards of fabric. Then calculate the total
number of Strips to cut and the Strip
cut width.
KEYSTROKE DISPLAY
1. Enter finished Square Size in Inches:
N N 0.
4 • 5 i ß
SIZE
4.5
INCH
2. Enter length of fabric and calculate
number of Squares:
3 y s
TOTAL
168.
QTY
3. Calculate number of strips:
s
TOTAL
21.
QTY STRIPS
4. Calculate cut width of strips:
s
TOTAL
5
INCH CUT WIDTH STRIPS
(Cont’d)