Calculated Industries QFCCL - Manual (Page 34)

P
OCKET
R
EFERENCE
G
UIDE
— 30
MEMORY OPERATION
Your calculator has a standard, cumu-
lative memory
M function that is
separate from the individual Fabric
storage keys (FAB-1 through FAB-6)
identified in the Fabric Storage section.
You can store values of the same
dimension (unitless values that are
added to existing linear or area values
will assume the previously stored
dimension).
You can recall stored values, calculate
the average of all the stored values,
and display the total number of entries
that have been stored in memory.
M
— Memory Plus
Adds any displayed number,
dimensioned or unitless, to the semi-
permanent, cumulative Memory.
c M — Memory Minus
Subtracts the displayed value from
the cumulative value stored in
memory.
R M — Memory Recall
Displays the following values:
1. Cumulative value stored in memory.
2. Average of all entries in M+ register.
3. Number of entries that have been
stored in the M+ register.