Calculated Industries QFCCL - Manual (Page 7)

P
OCKET
R
EFERENCE
G
UIDE
— 3
c 8 — Binding Cut
Stores the Binding Cut Width
(default: 2 1/2 Inches). This value is
used in the Binding calculation
found in the Total Quilt Yardage
function. This value should be
stored with seam allowance
included in the stored value (no
seam allowance adjustments are
made to the Binding calculations).
c - — Fabric Width
Stores the Fabric Width (default: 40
Inches). This value is used in all of
the material functions for providing
the proper Yardage based on the
stored Fabric Width.
c ÷ — Backing +
Stores the Backing Overage (default:
4 Inches). This value is used in the
Backing calculation found in the Quilt
Yardage function, and is added to all
four sides of the quilt to accommo-
date the extra material needed for
the quilting process.
Yardage and Meterage Keys
y — Yardage
Enters or converts to Yardage (linear
Yards). Yardage is based on the
stored Fabric Width (default is 40
Inches). Also used with the
/ key for
entering fractional Yardage values
(e.g.,
4 y 1 / 2 ).
(Cont’d)