Calculated Industries 6414 - Manual (Page 25)

Calculating Volume Using a Fixed Height
To set or program a fixed height, for example, eight feet-seven
inches, do the following:
Step: Key:
Enter program mode [Set] [H]
The Feet-Inch annunciator will start flashing. Press [M+] if
you want to change the units of measurement. The display will
scroll through the various units of measurement. Press [Set] to
select the measurement unit and begin storing. The first zero
(0) will start flashing.
Enter eight feet [M+] (press 8 times)
([M-] to subtract)
Store measurement [Set]
Enter seven inches [M+] (press 7 times)
([M-] to subtract)
Store height/depth [Set]
Clear display [RESET]
23 – User’s Guide