Calculated Industries 6414 - Manual (Page 51)

Revision Table - DRP Manual
4/12/95
1) Took out screens from LCDs. Changed some of the graphics.
2) Added a paragraph on the wheel radius key page.
3) Added sentence to several sections about resetting before
beginning new measurement.
4) Changed wording on section about wheel change. Also took
out screens on some graphics in that section.
5) Made some minor formatting changes ([RESET] was not capi-
talized everywhere it was used, the names of some keys were
not bolded, slightly changed format of the section about editing
stored measurements, changed the size of the All Clear LCD -
too small,)
6) Added speed limit to product specifications page.
7) Added sentence to section on storing and recalling values
about the extra storage keys on the DRP.
8) Changed LCDs in several sections to reflect square feet
instead of square yards.(Area, Volume, and Storing Multiple
Measurements sections)
49 – User’s Guide