Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 105)

91
Tr
o
u
b
le
sh
o
o
ti
n
g
Troubleshooting
Power and Battery
Problem Problem Possible cause Possible cause Solution Solution Page Page
Power
supply
The camera does
not turn on.
The battery is exhausted. Insert a fresh or fully-charged spare battery. 4
The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 4
The battery-chamber cover is not latched. Latch the battery-chamber cover. 5
The AC power adapter is not connected
properly. Make sure that the AC power adapter is prop-
erly connected.
6
The battery runs
down quickly.
The battery is cold.
Warm the battery by placing it in a pocket or
other warm place and re-insert it in the camera
immediately before taking a picture.
v
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth. —
The battery has been charged many times.
The battery has reached the end of its charging
life. Purchase a new battery.
—
p QUICK AF is selected for S POWER
MANAGEMENT. Select n POWER SAVE to reduce the drain on
the battery.
67
The camera turns
off suddenly.
The battery is exhausted. Insert a fresh or fully-charged spare battery. 4
The AC power adapter has been discon-
nected.
Reconnect the AC power adapter. 6
Charging
batteries
Charging does
not start.
The battery is not correctly inserted. Re-insert the battery in the camera. —
The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 4
The AC power adapter is not correctly
plugged into a power outlet. Plug the adapter correctly into the power out-
let.
6
Charging is slow. The temperature is low. Charge the battery at room temperature. —
The indicator
lamp lights, but
the battery does
not charge. There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth. —
The battery has been charged many times.
The battery has reached the end of its charging
life. Purchase a new battery. If the battery still
fails to charge, contact your FUJIFILM dealer.
108