Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 45)

31
More
on
P
h
oto
g
ra
ph
y
Shooting Mode
P P PROGRAM AE PROGRAM AE
In this mode, the camera sets aperture and shut-
ter speed automatically. Exposure can be adjust-
ed using the
d EXP. COMPENSATION option in
the F-mode menu.
3 Caution
If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show
“---”. Press the shutter button halfway to measure ex-
posure again.
B B TWIN CAMERA TWIN CAMERA
The camera simultaneously
takes two
D pictures—one
with each lens—with diff er-
ent options selected for each.
Selecting
B in the mode
selection menu displays the following options;
press the selector up or down to highlight an op-
tion and press MENU/OK.
•
V TELE/WIDE: Zoom for the left lens can be ad-
justed using the zoom control. The right lens is
zoomed all the way out (pg. 32).
• X 2-COLOR: The two pictures use diff erent set-
tings for
G color (pg. 32).
• W 2-SENSITIVITY: The camera sets sensitivity sep-
arately for each lens (pg. 32).
3 Caution: B Mode
In B mode, the camera dis-
plays the view through the left lens
only. Be careful not to obstruct the
right lens during shooting.
SET CANCEL
Simultaneous 2 shots
with wide-edge angle
and free-zooming angle
2-COLOR
2-SENSITIVITY
TELE/WIDE
SET CANCEL
Simultaneous 2 shots
with wide-edge angle
and free-zooming angle
2-COLOR
2-SENSITIVITY
TELE/WIDE