Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 66)

52
Viewing Pictures on a Computer
1 If the pictures you wish to copy are stored on a
memory card, insert the card into the camera
(pg. 7). If no card is inserted, pictures will be
copied from internal memory.
3 Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
2 Turn the camera off and connect the supplied
USB cable as shown, making sure the connec-
tors are fully inserted. Connect the camera di-
rectly to the computer; do not use a USB hub
or keyboard.
3 Press the a button for about a second to turn
the camera on. FinePixViewer will start auto-
matically and the “Save Image Wizard” will be
displayed. Follow the on-screen instructions to
copy pictures to the computer. To exit without
copying pictures, click Cancel.
3 Caution
If FinePixViewer does not start automatically, the
software may not be correctly installed. Disconnect
the camera and reinstall the software.
For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help menu.
Connecting the Camera Connecting the Camera
1 Note
The camera will not turn off automatically while connected to a computer.