Printing pictures via usb (2d only), Connecting the camera, Printing pictures via usb ( d only) – Cyclopital3D FinePix Real 3D W1 camera User Manual
Page 59
45
Co
n
n
e
ct
io
n
s
Printing Pictures via USB (
D Only)
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without fi rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Printing in
C
C pictures in MPO format can not be printed via direct USB connection, although JPEG copies created when
MPO+JPEG is selected for
o 3DREC can be printed in D (pg. 84). For information on C prints, visit http://
fujifilm.com/3d/print/.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown and
turn the printer on.
2
Press the
a button for about a second to turn
the camera on.
t USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
USB
00
PICTBRIDGE
OK
SET
FRAME
TOTAL: 00000
SHEETS
1 Notes
• Print pictures from internal memory or a memory card that has been formatted in the camera.
• Default printer page size and print quality settings are used when printing via direct USB connection.