Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 73)

59
Men
u
s
Using the Menus: Shooting Mode
N N ISO ISO
Control the camera’s sensitivity to light. Higher
values can be used to reduce blur when lighting
is poor; note, however, that mottling may appear
in pictures taken at high sensitivities. If AUTO is
selected, the camera will adjust sensitivity auto-
matically in response to shooting conditions.
Settings other than AUTO are
shown by an icon in the dis-
play.
ISO 100
M
1 Note
Sensitivity is not reset when the camera is turned off .
O O IMAGE SIZE IMAGE SIZE
Choose the size and aspect ratio at which still pic-
tures are recorded. Large pictures can be printed
at large sizes with no drop in quality; small pic-
tures require less memory, allowing more pictures
to be recorded.
Option Option Prints at sizes up to Prints at sizes up to
O 4 : 3 31 × 23 cm (12.2 × 9.1 in.)
O 3 : 2 31 × 21 cm (12.2 × 8.1 in.)
P 4 : 3 22 × 16 cm (8.6 × 6.5 in.)
Q 4 : 3 17 × 13 cm (6.8 × 5.1 in.)
The number of pictures that can be taken at cur-
rent settings (pg. 104) is shown to the right of the
image quality icon in the display.
1 Note
Image quality is not reset when the camera is turned
off or another shooting mode is selected.